Pick up by Appointment only

Shopping Cart

1

How to Dilute 35% Food Grade Hydrogen Peroxide (Dilution Chart)

How to Dilute 35% Food Grade Hydrogen Peroxide (Dilution Chart)

Quick answer: to make 1 litre of 3% hydrogen peroxide from 35% food grade hydrogen peroxide, mix 86 mL of 35% hydrogen peroxide with 914 mL of distilled water. That is about 1 part 35% to 11 parts water. Always add the peroxide to the water, never the water to the peroxide, and wear gloves and eye protection.

35% hydrogen peroxide is a concentrate. Most cleaning, sanitising and food processing jobs use it diluted to 3%, 6% or 12%. This guide gives a dilution chart for 35% and 30% hydrogen peroxide, the simple formula behind it, and how to handle and store the concentrate safely.

Hydrogen peroxide dilution chart (to make 1 litre)

The amounts below make 1 litre (1,000 mL) of finished solution. For 500 mL, halve them; for 5 L, multiply by five.

Strength you want From 35% H₂O₂ Distilled water Ratio (35% : water)
0.3% 8.6 mL 991 mL about 1 : 116
3% 86 mL 914 mL about 1 : 11
6% 171 mL 829 mL about 1 : 5
9% 257 mL 743 mL about 1 : 3
12% 343 mL 657 mL about 1 : 2

Dilution chart for 30% hydrogen peroxide

Strength you want From 30% H₂O₂ Distilled water Ratio (30% : water)
0.3% 10 mL 990 mL 1 : 99
3% 100 mL 900 mL 1 : 9
6% 200 mL 800 mL 1 : 4
9% 300 mL 700 mL about 1 : 2.3
12% 400 mL 600 mL 1 : 1.5

Quick kitchen rule: adding 100 mL of 35% hydrogen peroxide to 1 litre of distilled water gives about 3.2%, and 200 mL to 1 litre gives about 5.8%. These are the simple mixes printed on our 35% hydrogen peroxide sale pack, which comes with distilled water.

The dilution formula (C1 × V1 = C2 × V2)

Every row in the chart comes from one formula:

Volume of concentrate = final volume × final strength ÷ starting strength

Example: you want 2 litres of 6% from 35%. 2,000 mL × 6 ÷ 35 = 343 mL of 35% hydrogen peroxide. Top it up with distilled water to 2,000 mL (about 1,657 mL of water).

How far does one bottle go? A 250 mL bottle of 35% makes about 2.9 litres of 3% solution. A 1 litre bottle of 35% makes about 11.7 litres of 3%.

Step by step: how to dilute 35% hydrogen peroxide

  1. Put on protection. Nitrile gloves and safety glasses. 35% hydrogen peroxide can burn skin and damage eyes.
  2. Use clean equipment. A clean glass or HDPE plastic measuring cylinder and container. Never use metal containers or utensils.
  3. Measure the water first. Pour the distilled water into the container.
  4. Add the peroxide to the water. Measure the 35% hydrogen peroxide and pour it slowly into the water.
  5. Mix gently and label. Swirl to mix. Label the bottle with the strength and date.
  6. Store correctly. Keep the diluted solution in an opaque, vented-cap bottle in a cool, dark place.

Why use distilled water?

Tap water contains minerals and traces of metals such as iron and copper. These speed up the breakdown of hydrogen peroxide into water and oxygen, so a solution made with tap water loses strength faster. Steam distilled water has these impurities removed, so your diluted peroxide stays stable for longer. Read more in our guide to distilled water in Australia.

Which strength for which job?

Strength Common uses
0.3%–3% Rinsing fruit and vegetables in food processing, wiping bench tops, door handles and food contact surfaces
6%–7% Heavier surface cleaning such as toilets, vanity units and bathrooms
9%–12% Commercial sanitising and water treatment, used as directed for the process
30%–35% Concentrate for dilution and industrial or food processing use by trained users

Always follow the dilution and contact time that apply to your own process or industry guidelines.

Buy ready-diluted or concentrate?

If you only need a few litres of a common strength, ready-diluted food grade hydrogen peroxide 0.3% to 12% is simpler and safer. It comes in 500 mL, 1 litre, 2.5 L and 5 L bottles, so there is no measuring and no handling of the concentrate.

If you use larger volumes, 35% food grade hydrogen peroxide is better value, because one litre of concentrate makes almost 12 litres of 3%. For applications that need a higher-purity product, see Hydropure 30%–35% premium grade. You can compare the full range on our hydrogen peroxide 35% and food grade range.

Safety and storage of 35% hydrogen peroxide

  • Dangerous good. Hydrogen peroxide at 20% to 60% is classed as a dangerous good (UN 2014, oxidiser, corrosive). ANPROS supplies 30% and 35% on request, with pickup from Boronia, VIC by appointment or courier delivery.
  • Not for drinking. "Food grade" describes the purity and stabilisers, not that it is safe to swallow. Do not drink hydrogen peroxide at any strength.
  • Keep it away from heat, sunlight, metals, flammable materials and other chemicals. Never mix it with vinegar, bleach or ammonia.
  • Store in the original vented container, upright, in a cool, dark, well-ventilated place, out of reach of children.
  • If it splashes on skin, rinse with plenty of water. For eyes, rinse for at least 15 minutes and get medical help. Always check the safety data sheet (SDS).

Frequently asked questions

How do I make 3% hydrogen peroxide from 35%?

Mix 86 mL of 35% hydrogen peroxide into 914 mL of distilled water to make 1 litre of 3%. That is about 1 part 35% to 11 parts water.

How do I dilute 35% hydrogen peroxide to 12%?

Add 343 mL of 35% hydrogen peroxide to 657 mL of distilled water to make 1 litre of 12%, a ratio of about 1 : 2.

How much 3% does a 250 mL bottle of 35% make?

About 2.9 litres. Use 250 mL of 35% and make it up to 2,917 mL with distilled water.

Can I use tap water to dilute hydrogen peroxide?

You can, but the solution will break down faster because of minerals and metals in tap water. Distilled water keeps diluted peroxide stable for longer.

What is the difference between food grade and regular hydrogen peroxide?

Food grade hydrogen peroxide is made for food processing and food contact use, with stabilisers suitable for that purpose. Pharmacy 3% products often contain other stabilisers. Neither is for drinking.

Where can I buy 35% food grade hydrogen peroxide in Australia?

ANPROS in Boronia, Victoria supplies 35% food grade hydrogen peroxide in 250 mL to 5 L packs on request, and ready-diluted strengths from 0.3% to 12% online.

Leave A Comments

Related post